EditPad Pro is a powerful text editor for Windows. You can edit all text files with EditPad Pro. Open text files saved on Linux, UNIX and Macintosh computers, or even text files from old DOS PCs or IBM mainframes. You’ll never have to worry about being unable to open a text file, and you’ll always be able to save your files in a format that people with less flexible text editors can read.
Many other text editors automatically convert each file you open to Unicode, and convert it back to the legacy encoding when saving. This reduces performance with large files. If the wrong encoding is used by the editor, or if the file had invalid characters, data corruption will occur.
EditPad Pro reads and edits files in their original encoding. This allows EditPad Pro to open huge files instantly. EditPad Pro preserves the compatibility of all files you edit with the legacy systems that may still be using those files. EditPad Pro only converts a file’s encoding if you explicitly ask it to. You can convert between any two encodings listed below.
Newline (frequently called line ending, end of line (EOL), line feed, or line break) is a control character or sequence of control characters in a character encoding specification (e.g. ASCII or EBCDIC) that is used to signify the end of a line of text and the start of a new one. Some text editors set this special character when pressing the. UNIX and UNIX-like operating systems (including Mac OS X) represent line endings as LF alone. Therefore, a text file prepared in a Windows environment will, when copied to a UNIX-like environment such as a NeSI cluster, have an unnecessary carriage return character at the end of each line. Convert Line Endings To - Unix Format / Windows Format / Old Mac Format Or, in Command Palette (cmd-shift-p or ctrl-shift-p), type Convert To Unix Format, or Convert To Windows Format, or Convert to Old Mac Format (Note: This will convert the line endings of the text in the active editor.). Hexadecimal edit mode. Use JOE as a disk editor: joe -overwrite -hex /dev/hda1,0,512 (edit first sector of /dev/hda1). Non-destructive editing of binary files even when handling MS-DOS or UNIX line endings. Swap file allows editing files larger than memory. Context sensitive on-line help. I think the problem is the line endings. Mac and Windows use different conventions. Wordpad can handle the difference, Notepad cannot. You can use another text editor on the Mac, like TextWrangler, which offers a choice of line endings.
Mac Text Editor Built In
EditPad Pro handles DOS/Windows, UNIX/Linux and Macintosh line breaks. Open and save text files encoded in Unicode (UTF-8, UTF-16 and UTF-32), any Windows code page, any ISO-8859 code page, and a variety of DOS, Mac, EUC, EBCDIC, and other legacy code pages. Convert files between any of these encodings.
— Michail Mersinis
13 March 2018
Type in Any Language or Script
You can use any keyboard layout and any IME (input method editor) for any language or script that Windows provides in the Regional Settings in the Control Panel. That includes right-to-left scripts such as Hebrew or Arabic and complex scripts such as the Indic scripts. If you set the default encoding in EditPad to Unicode, you can use all languages and scripts at the same time in a single file.
You can even use exotic scripts that don’t have legacy Windows code pages, or built-in support from Windows. EditPad Pro is fully compatible with all your virtual keyboard drivers, such as those created with the Microsoft Keyboard Layout Creator (MSKLC).
EditPad Pro’s character map allows you to insert any character supported by the current file’s encoding, which is very convenient for working with characters or languages that you cannot type on your keyboard. The status bar can indicate the code page numbers and Unicode code points of characters as you type or scroll through a file.
Code Pages Supported by EditPad Pro
EditPad Pro supports a very wide range of code pages used to save text files on Windows computers and other platforms. You can instantly convert a file between any two encodings by selecting Convert Text Encoding in the menu, or re-interpret a file using a different encoding in case EditPad Pro’s auto-detection fails. You can specify different default encodings for each file type.
Unicode
Unicode text files can store text in any language known to humanity. Modern globalized applications often use UTF-8 or UTF-16 to save text files.
- UTF-8
- UTF-16 little endian
- UTF-16 big endian
- UTF-32 little endian
- UTF-32 big endian
All Windows (ANSI) Code Pages
Windows applications that don’t use Unicode save text files using one of the Windows code pages, often called “ANSI” code pages in technical documentation for Windows. EditPad Pro supports all single byte (Western languages) and double byte (Far East languages) code pages, allowing you to open any text file created on a Windows computer.
- Windows 1250: Central European
- Windows 1251: Cyrillic
- Windows 1252: Western European
- Windows 1253: Greek
- Windows 1254: Turkish
- Windows 1255: Hebrew
- Windows 1256: Arabic
- Windows 1257: Baltic
- Windows 1258: Vietnam
- Windows 874: Thai
- Windows 932: Japanese Shift-JIS
- Windows 949: Korean
- Windows 936: Simplified Chinese GBK
- Windows 950: Traditional Chinese Big5
All ISO-8859 Code Pages
Applications that don’t use Unicode running on Linux and other UNIX variants usually save text files using one of the ISO-8859 code pages. EditPad Pro supports all ISO-8859 code pages, allowing you to open any text file created on a Linux computer.
- ISO-8859-1 Latin-1 Western European
- ISO-8859-2 Latin-2 Central European
- ISO-8859-3 Latin-3 South European
- ISO-8859-4 Latin-4 North European
- ISO-8859-5 Cyrillic
- ISO-8859-6 Arabic
- ISO-8859-7 Greek
- ISO-8859-8 Hebrew
- ISO-8859-9 Latin-5 Turkish
- ISO-8859-10 Latin-6 Nordic
- ISO-8859-11 Thai (TIS-620)
- ISO-8859-13 Latin-7 Baltic Rim
- ISO-8859-14 Latin-8 Celtic
- ISO-8859-15 Latin-9
- ISO-8859-16 Latin-10 South-Eastern European
EUC Code Pages
EUC stands for Extended UNIX Code. These encodings were common on UNIX platform for encoding text in Far East languages that use up to two bytes per character. EditPad Pro supports the EUC code pages that were commonly used prior to Unicode.
- EUC-JP: Japanese (JIS 201 + JIS 208)
- EUC-JP-212: Japanese (JIS 201 + JIS 208 + JIS 212)
- EUC-KR: Korean (KS 1001)
- EUC-CN: Simplified Chinese (GB 2312)
- EUC-TW: Traditional Chinese (CNS 11643)
ASCII
EditPad Pro can interpret pure 7-bit ASCII files in several ways. If you select US-ASCII (7-bit) you’ll see pure ASCII. EditPad Pro also supports a number of ASCII-based notations. EditPad Pro will display the actual (Unicode) characters and allow you to type and paste actual characters. But the file on disk will be pure ASCII, using the selected notation to encode non-ASCII characters.
- ASCII with uFFFF Unicode escapes
- ASCII with hexadecimal  and/or decimal  Unicode character references
- ASCII with HTML entities (e.g. é for é)
- VIQR: Vietnamese Quoted-Readable
DOS Code Pages
EditPad Pro supports a wide variety of code pages used by the legacy DOS operating systems like MS-DOS and PC-DOS. These code pages include the famous “box drawing symbols” used by text-based DOS applications to simulate graphical menus and windows.
- DOS 437: United States
- DOS 737: Greek
- DOS 775: Baltic Rim
- DOS 850: Western European
- DOS 852: Central European
- DOS 855: Cyrillic
- DOS 857: Turkish
- DOS 860: Portuguese
- DOS 861: Icelandic
- DOS 862: Hebrew
- DOS 863: Canadian French
- DOS 864: Arabic
- DOS 865: Nordic
- DOS 866: Cyrillic Russian
- DOS 869: Greek 2
Classic Mac Code Pages
Files created on modern Macs running OS X normally use Unicode. Files created on older Macs will probably use one of these legacy code pages.
- Mac Arabic
- Mac Celtic
- Mac Central European
- Mac Croatian
- Mac Cyrillic
- Mac Dingbats
- Mac Farsi
- Mac Gaelic
- Mac Greek
- Mac Hebrew
- Mac Icelandic
- Mac Inuit
- Mac Roman (Western European)
- Mac Romanian
- Mac Symbol
- Mac Thai
- Mac Turkish
- Mac Chinese Simplified
- Mac Chinese Traditional
- Mac Devanagari
- Mac Gujarati
- Mac Gurmukhi
- Mac Japanese
- Mac Korean
Other Legacy Code pages
The code pages provided by DOS and Windows weren’t sufficient or optimal for all languages. This resulted in a wide range of code pages used in specific regions. The KOI8 encodings are very popular for encoding Russian text files. If you receive files with text in Russian, they’re likely to be encoded in KOI8 rather than in Windows 1251 or ISO-8859-5. Vietnamese files often use legacy code pages that encode all characters with one byte rather than Windows 1258 which uses combining marks.
- ArmSCII-7: Armenian
- ArmSCII-8: Armenian
- ArmSCII-8A: Armenian
- GEOSTD8: Georgian
- ISCII Bengali & Assamese
- ISCII Devanagari
- ISCII Gujarati
- ISCII Kannada
- ISCII Malayalam
- ISCII Oriya
- ISCII Punjabi (Gurmukhi)
- ISCII Tamil
- ISCII Telugu
- ISIRI 3342: Farsi
- ISO-10858: Armenian
- Kamenický: Czech & Slovak
- KOI8-R: Russian
- KOI8-U: Ukranian
- KZ-1048: Kazach
- Mazovia: Polish
- MIK: Bulgarian
- PTCP154: Cyrillic Asian
- TCVN: Vietnamese
- VISCII: Vietnamese
- VNI: Vietnamese
- VPS: Vietnamese
- YUSCII Cyrillic: Yugoslavia
- YUSCII Latin: Yugoslavia
EBCDIC
The EBCDIC encodings were the de facto standard when computer files were saved on punch cards, and are still used by mainframe systems from IBM and other vendors. EditPad Pro supports the more commonly used EBCDIC encodings.
- EBCDIC 037: US & Canada
- EBCDIC 424: Hebrew
- EBCDIC 500: International
- EBCDIC 875: Greek
- EBCDIC 1026: Turkish
Complex Legacy Encodings
EditPad can convert text from and to several other encodings. These encodings cannot be edited directly because they use partial bytes to encode characters (UTF-7), use a state mechanism that requires the entire file to be processed (ISO-2022 and HZ), or use a single byte to represent multiple Unicode characters (TSCII). If you edit a file using one of these encodings, EditPad Pro will convert it to Unicode when reading the file and convert it back into the legacy encoding when saving the file.
- Unicode, UTF-7
- ISO-2022-JP: Japanese (JIS 201+208)
- ISO-2022-JP-1: Japanese (JIS 201+208+212)
- ISO-2022-JP-2: Japanese multilingual (JIS 201+208+212)
- ISO-2022-KR: Korean (KS 1001)
- ISO-2022-CN: Chinese (GB 2312 + CNS 11643)
- HZ: Simplified Chinese
- TSCII: Tamil
— Tsvi Sadan
7 June 2011, Israel
— Graeme Geldenhuys
29 January 2018, United Kingdom
— Marcin Grzegorczyk
8 June 2006, Poland
— Frank Lin
14 February 2007, USA
A Truly International Text Editor
It’s no surprise that EditPad Pro is one of the few Windows text editors that you can use to edit text files in any language or script. While most text editors boldly advertise Unicode support, they often have trouble with anything outside the repertoire of Western European characters familiar to American programmers.
EditPad Pro is the brainchild of Jan Goyvaerts, who grew up in Belgium, a small country in Europe. At school Jan had to study Belgium’s three official languages (Dutch, French and German), as well as English. Nowadays, Jan lives in Thailand, with its unique script that writes vowels around the consonants in all four directions, rather than just from left to right. Obviously, he wants his text editor to work perfectly with all these languages.
You Need EditPad Pro To Edit Text Files
- Buy and Download EditPad Pro now! Only 49.95 euro
Page URL: http://www.editpadpro.com/m/unicode.html
Page last updated: 6 January 2020
Site last updated: 6 October 2020
Published by Just Great Software Co. Ltd.
Copyright © 2000-2020 Jan Goyvaerts. All rights reserved.
- Line breaks in Windows, UNIX and Macintosh text files
Line Breaks in Windows, UNIX & Macintosh Text Files
A problem that often bites people working with different platforms, such as a PC running Windows and a web server running Linux, is the different character codes used to terminate lines in text files.
Windows, and DOS before it, uses a pair of CR and LF characters to terminate lines. UNIX (Including Linux and FreeBSD) uses an LF character only. OS X also uses a single LF character, but the classic Mac operating system used a single CR character for line breaks. In other words: a complete mess.
Problems arise when transferring text files between different operating systems and using software that is not smart enough to detect the line break style used by a file. E.g. if you open a UNIX file in Microsoft Notepad, it will display the text as if the file contained no line breaks at all. If you open a Windows file in a UNIX editor like “joe” or “vi”, you will see a control character (the CR) at the end of each line. Older versions of Perl on Linux would refuse to run any script that used Windows line breaks, aborting with an unhelpful error message.
Mix All Line Break Styles
EditPad Pro does not care which line break style a file uses. It will automatically detect the format and indicate it in the status bar. If you open a Mac file on your Windows PC, it will still be a Mac file when you save it. To change the line break format, select the Windows, UNIX or Mac option in the Convert menu.
EditPad Pro can even handle files that use inconsistent line breaks. This is indicated in the status bar as (Mixed) along with the dominant style. In such a situation, it’s best to make the line break style consistent. Very few applications can properly handle files with mixed line break styles. Simply select the line break style you want (Windows, UNIX, Mac) from EditPad Pro’s Convert menu.
Best Text Editors For Mac
Transferring Text Files Between Computers Using Different Operating Systems
Free Html Text Editor For Mac
A common way to transfer files between a computer and a server is FTP. All FTP software can transfer files in “ascii” or “binary” mode. In “ascii” mode, the FTP software will convert line breaks, while in “binary” mode it will not. In “ascii” mode, transferring a Windows file from a Windows PC to a Linux server results in a UNIX file on the server. Downloading the file again converts it back to Windows. This system works perfectly if you remember to turn on “ascii” mode for text files. Many FTP clients also have an “automatic” mode that switches between ascii and binary depending on the extension of the file you’re transferring.
Things go wrong when mixing “ascii” and “binary” transfers. When a webmaster uploads a Windows file to a Linux server in “binary” mode, the file has CR LF line breaks on the server. If you then download that file with your web browser on your Windows PC (which does the UNIX->Windows conversion), the browser will interpret the file on the server as a UNIX file, even though it is in Windows format. It will convert each LF into CR LF, resulting in a file that uses CR CR LF as line breaks.
If you try to open that file, you’ll get quite different results with various software. Microsoft Notepad will interpret the CR CR LF as a single line break. EditPad however, since it supports mixed line break styles, will interpret it as a double line break. First a CR (Mac style), and then a CR LF (Windows style). The file will appear double spaced in EditPad Pro.
To remove the unwanted blank lines, simply select Double->Single spaced in EditPad Pro’s Convert menu.
EditPad Pro’s built-in FTP always transfers files in binary mode. This way you will never have any surprises with the line breaks. Before uploading a file, use the Convert menu to make sure the file has the line break style that the server expects (if the server cares at all). EditPad Pro will then upload the file with that line break style. When downloading a file, you can be sure that EditPad Pro will show you the file with the line breaks it has on the server.
Page URL: http://www.editpadpro.com/m/tricklinebreak.html
Page last updated: 24 December 2019
Site last updated: 6 October 2020
Published by Just Great Software Co. Ltd.
Copyright © 2000-2020 Jan Goyvaerts. All rights reserved. How to format hdd for os x hackintosh.